User's Manual

Extended Function Mode STRATEGIC Technologies Inc
26
iTRX Series Users Guide (STI) Feb 6, 2004
Extended Function Mode
Extended Function Mode is used to change the internal settings inside the ACU. The ability to change
the internal settings gives the ACU great flexibility. The installer can now change important settings
depending upon their needs.
Extended Function Mode can be accessed by moving to the screen “B=Exit” as shown on page 30 in
Function Mode. To access the extended configuration settings, hold down the iRX button on the
LOCK. Once a small dot begins to flash in the right top corner of the display press the "A" button. This
will cause the ACU to display the configuration screen, as shown in the next diagram.
A=Next Function
B=Set Lng: English
Pressing the “B” button repeatedly will cycle through the various available languages. The language
displayed on the screen, is the language that will be used throughout all of the screen displays.
Languages currently available are: English, Spanish, French, and Italian.
A=Next Function
This screen allows the installer to change the way the ACU dials. The ACU can dial both pulse and
tone. Select the mode that is appropriate for your telephone network. Press the “B” button to change
the dial mode between “T” (tone dialling) and “P” (pulse dialling). Press the “A” button to move to the
next screen.
A=Next Function
B=Dial Prefix: N
If the ACU is installed in an office or a hotel, the telephone system may require an additional digit to be
dialled to access an outside line. Pressing the “B” button changes the prefix between “N” which
indicates “No Prefix” required to a “digit” from 0 to 9. Stop pressing the “B” button when the prefix
required is reached. Press “A” button to proceed to the next function.