User's Manual

Function Mode STRATEGIC Technologies Inc

iTRX Series Users Guide (STI) Feb 6, 2004

Function Mode

The ACU's Function Mode allows the installer to clear stored events, enter the test mode and enter the

Extended Function Mode. To enter the Function Mode, use the LOCK. Simply press the iRX

button on the LOCK, while holding the LOCK within three feet (1 metre) of the ACU. The front panel

display will show the message "Please Wait....", and will then display two choices:

"A= Function Mode" and "B=Turn ACU Off", as shown below.

A=Function Mode

B=Turn ACU Off

The ACU can be turned off by pressing the “B” button on the front display of the ACU. Pressing the "A"

button will enter Function Mode. The first function mode screen is displayed, as shown below.

A=Next Function

B=Clear Events

Press the "B" button to clear all stored events in the ACU's memory. The display will prompt “A=** Clear

**”; press “A” to clear events. The message "Events Cleared!" will be displayed briefly. Press the "A"

button to move to the next screen.

A=Next Function

B=Quick Install

Press “B” to enter the Quick Install function. Please refer to Quick Install on Page 33 for more

information. Press “A” to move to the next screen