User's Manual

BASIC FUNCTIONS
LOAD
KleeYa - User Manual - Version 2 3-57
Figure 3-54: Reagent rack with two Reagent Cartridges
4. Keep the rack straight and move it jerkily from top to bottom. This movement
is intended to loosen the liquid from the sealing foil and the top edge. Repeat
the jerky movement if necessary.
5. Remove the foil from the Reagent Cartridge(s).
6. Open the reagent loading bay flap.
7. Push the reagent rack carefully into the desired lane, press the white button
(1) and press the handle against the pressure of the spring, until it engages
with an audible click.
While the reagent rack is introduced in the lane, the RFID label of the Reagent
Cartridges are read automatically.
Figure 3-55: Reagent loading bay
8. Tap on the screen on the loaded reagent rack symbol to get information about
the Reagent Cartridges.
9. Close the reagent loading bay flap.