User's Manual

3-54 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
LOAD
5. Enter the ID.
Calibrator IDs must start with $Cal.
It is recommended to use max. 20 characters (letters, numbers, special
characters) for the ID.
Optionally, the barcode can also be scanned with a hand-held barcode
scanner. The repeated entering of the ID is then not necessary.
6. Tap on the Next button.
7. Retype the ID.
8. Tap on the Ok button.
9. If necessary tap on the next marked test tube with unknown ID.
10. Insert the sample rack again.
The user software closes the Edit IDs screen.
All barcodes that were read automatically during the first rack insertion and
all manually entered barcodes appear in the list.
Notice: The recall mode can be used any number of times while the Edit IDs screen
is open.