User's Manual

3-52 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
LOAD
b. Tap on the desired set of tests.
The set of tests assignment is canceled.
c. If necessary, repeat the steps for further set of tests.
4. If necessary, tap on the STAT button to cancel the assigment.
SELECT ALL OR
SEVERAL
It is also possible to select all or several samples, calibrators, or controls to assign
tests or STAT to them together:
1. Tap on the checkbox in the first column of table headings.
Instead of the position number in the lines an already marked checkbox
appears.
Figure 3-50: Top checkbox
2. If you wanted to select all samples, calibrators, or controls, you are now ready.
3. If you do not want certain samples, calibrators, or controls to be selected, you
must tap on the respective checkbox to deselect them.
If you tap on the checkbox again, the respective checkmark is set again.
Figure 3-51: Checkboxes
4. If you want to deselect all lines, tap on the checkmark in the first column of
table headings again.