User's Manual

3-46 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
LOAD
Table 3-4: Status info for (test) tubes
PROCEDURE/
SHOW
INFORMATION
1. Tap on the Load button in the main menu bar to show the Load screen.
2. Tap on the Samples button below the Load button.
SAMPLE SAFETY • Traceability of the diagnostic results
For maintaining traceability of the diagnostic results, the sample should be
handled according to the laboratories quality system as described in the local
requirements.
• Maintaining safety
For maintaining safety, the samples must fulfill the requested installation and
operating conditions as stated in the instruction for use of the relevant assay.
Symbol Description
Calibration tube
Control tube
Empty position in the sample rack.
Sample test tube assigned tests.
Sample test tube with barcode/sample ID.
Sample test tube with duplicate barcode/sample ID.
Tube without or unreadable barcode/sample ID.
STAT: Sample/calibration/control to be tested in priority.
A STAT test is defined as a quick turnaround time, such STAT
tests are ordered when the result is needed quickly for a
decision regarding patient management. These emergency
STAT samples can be programmed for all the sample tray
positions. If the profiles are sent through by a centralized
computer system, the category of STAT is already associated
with the profile. The priority of any sample can be raised to
STAT as long as it has not already been incorporated into the
instrument workflow.