User's Manual

3-44 KleeYa - User Manual - Version 2

BASIC FUNCTIONS

LOAD

TUBE AND

SAMPLE RACK

SPECIFICATIONS

All used tubes (sample test tubes, calibrator tubes, or control tubes) must fulfill the

following specifications:

Table 3-1: Tube specifications

A special sample rack (A12, A13, ... , C10) must be used for each type of tube (1-8)

so that the instrument can correctly dispense liquid from the tubes.

Each (new) standard sample rack can be customized to a specific sample rack type

according to its intended use/used tubes,

see chapter 5.3.1 on page 5-11

LED STATUS The LEDs above sample loading bay lanes show the status of the sample rack in the

lane:

Table 3-2: LED status

Tube height Tube diameter

Sample rack

type

1 92 - 100 mm 12 mm A12

2 92 - 100 mm 13 mm A13

3 92 - 100 mm 15 mm A15

4 92 - 100 mm 16 mm A16

5 75 mm (+ spacer in sample rack) 12 mm B12

6 75 mm (+ spacer in sample rack) 13 mm B13

7 75 mm (+ spacer in sample rack) 15 mm B15

8 75 mm (+ spacer in sample rack) 16 mm B16

9 30 mm (in 75 mm transfer tube) 10 mm C10

LED Lane Notice

Off Lane is empty

Sample rack (samples, calibrators,

or controls) is finished or unused

Slow flashing Sample rack can be loaded in the

selected lane

On Sample rack (samples, calibrators,

or controls) will scheduled or is

processed

Do not unload the

sample rack!

Fast flashing Error See error message!