User's Manual

BASIC FUNCTIONS
OVERVIEW
KleeYa - User Manual - Version 2 3-37
3.3.6 LOAD OR UNLOAD SOLID WASTE BAG
The Solid Waste detail view shows the filling level of the solid waste in percent and
allows to empty the solid waste bag (foil bag).
Figure 3-41: Solid Waste detail view
To display the filling status of the solid waste bag the instrument counts the cuvettes
and Anchor® Tips since the last emptying. The filling status of the solid waste bag is
additionally displayed in color:
• Grey: Level ok.
• Orange: Level become full.
• Red: The solid waste bag is full.
Solid waste bag presence
The instrument does not monitor the presence of the solid waste bag!
It is strictly forbidden to use the instrument without a solid waste bag on.
• Check the presence of the solid waste bag before starting a run.
The instrument has a small intermediate container, which allows to change the solid
waste bag during operation.
UNLOADING
1. Tap on the Solid waste button or on the corresponding symbol on the
displayed instrument surface.
The Solid Waste detail view is shown on the Overview screen.
2. Open the solid waste flap.