User's Manual

3-30 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
OVERVIEW
SHOW
INFORMATION
1. Tap on one of the Liquid container buttons or on the corresponding symbols
on the displayed instrument surface.
The Liquids detail view is shown on the Overview screen.
UNLOADING 1. Pull out the wash buffer/system liquid containers drawer.
2. Raise the front of the (empty) system liquid main container approximately
2 cm (0.8 inch).
Figure 3-32: Unloading system liquid main container
3. Pull the system liquid main container forward and remove it.
LOADING 1. Prepare 10 l purified water.
2. Open the system liquid main container screw cap (blue cap) and pour in the
purified water (outside the instrument).
3. Close the screw cap.
4. Insert the system liquid main container into the instrument.
Figure 3-33: Loading system liquid container
5. Move the system liquid main container connection port over the connection
port of the intermediate container on the back side.