User's Manual

3-18 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
OVERVIEW
3.3.2 LOAD CUVETTES
The Cuvettes detail view shows the number of loaded cuvettes and allows to load
cuvette stacks.
Cross-contamination by multi-use
Repeatedly use of single-use cuvettes will cause cross-contamination.
• Never reuse single-use cuvettes.
Figure 3-16: Cuvettes detail view
The filling status of the cuvettes are additionally displayed in color:
• Grey: Number of cuvettes is high enough.
• Orange: Number of cuvettes is low.
• Red: No or not enough cuvettes loaded.
After switching on the instrument, the exact number of cuvettes of an opened stack
cannot be displayed. Cuvettes of an opened stack are counted as 1 until they are
used up.
Please note the important consumable information (package insert) about the
cuvettes before use, see chapter 8.3.2 on page 8-6 .
SHOW
INFORMATION
1. Tap on the Cuvettes button or on the corresponding symbol on the displayed
instrument surface.
The Cuvettes detail view is shown on the Overview screen.