User's Manual

3-4 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
MENU BARS (OVERVIEW)
3.2.2 MAIN MENU BAR
Overview
This function/screen shows the status of all resources
(Dispense Cartridges, cuvettes, Anchor® Tips, wash
buffer, system liquid, solid waste and liquid waste) in
the instrument. Additionally, these resources can be
loaded and unloaded via this screen.
Open maintenance tasks or errors are also shown.
See chapter 3.3 on page 3-5 for detailed information.
Load
This function/screen gives an overview of all loaded
samples, calibrators, controls and reagents. For
samples, calibrators, and controls the assignment to
assays (tests) are also shown. For reagents, extended
information is shown.
The loading and unloading of samples, calibrators,
controls and reagents is also possible.
See chapter 3.4 on page 3-42 for detailed information.
Results
This function/screen gives information about all results
of the process, calibration curves, reports and the event
log.
See chapter 3.5 on page 3-59 for detailed information.
Maintenance
This function/screen gives an overview about the
maintenance tasks, their status and allows to start
these tasks.
See chapter 3.6 on page 3-75 for detailed information.
Definitions
This function/screen gives information about test
definition, data reduction, and control definition.
See chapter 3.7 on page 3-78 for detailed information.
Setup
This function/screen gives information about the
system settings, user accounts and report settings and
allows to change it.
See chapter 3.8 on page 3-90 for detailed information.
Help
This function/screen shows the online help.