User's Manual

1-16 KleeYa - User Manual - Version 2
INTRODUCTION
POSITIONS OF SAFETY LABELS AND TYPE LABEL
1. General warning label:
• on the left and the right pipettor arm
• inside the instrument, to the right and left of
the Dispense Cartridges area
• on the instrument side behind the wash
buffer/system liquid containers drawer cover
• on the instrument side behind the liquid
waste containers drawer cover
2. Biological hazard label:
• on the sample/Anchor® Tips loading bay flap
• on the solid waste flap
• under both containers in the liquid waste
containers drawer
• on the instrument side behind the liquid
waste containers drawer cover
• on both liquid waste containers
3. Disconnect mains power connector before
servicing label:
• next to the power cable on the back side
• on the cover of the electronic compartment
4. Laser hazard label:
• on the top of the double ring incubator
5. Laser hazard label:
• on the side of the double ring incubator
6. Hot surface warning labels:
• next to both pipettor X-motors
7. Mechanical hazard label:
• on the left and right side of the top cover
holder
• on the cuvette module
8. Floor-level obstacle label:
• on the left and right side of the wash buffer/
system liquid containers drawer
• on the left and right side of the liquid waste
containers drawer
9. No heavy load label:
• on the reagent loading bay flap
• on the sample/Anchor® Tips loading bay flap
10. No stepping on surface/drawer label:
• under the containers in the wash buffer/
system liquid containers drawer
• under the containers in the liquid waste
containers drawer