User's Manual

5-18 KleeYa - User Manual - Version 2
MAINTENANCE AND SERVICE
SERVICE
Check:
9. Check all sample positions for correct mounting of spacers and springs.
Spacers must be pushed to the bottom and sit plain inside the rack. All springs
must be inserted and correctly snapped in.
Example (in the figure from left to right):
• all is well
• the spacer does not fit properly
• the spring is not properly snapped in
Figure 5-15: Check
Sample rack type label:
10. Stick the correct type label onto the sample rack (see chapter 5.3.1 on page 5-11
and chapter 5.3.1.1 on page 5-11) .