User's Manual

1-10 KleeYa - User Manual - Version 2
INTRODUCTION
SAFETY INSTRUCTIONS
Overheating
Improper placing of the instrument may cause fire or serious instrument damage in
case of overheating.
• Do not block or cover ventilation slots.
• The air shall be able to circulate.
Sharp edges
Sheet metal parts and circuit boards located behind protective covers might have
sharp edges. Contact might lead to injuries.
• Wear cut resistant gloves!
• Use caution at corners and edges!
Unauthorized changes to the instrument
Any changes to the instrument that are not authorized by the manufacturer will lead
to the loss of the validity of the conformity to the applicable regulations the
manufacturer has declared. In this case, the customer is responsible for the
fulfillment of the applicable regulations.
• Do not perform unauthorized changes.
Interference by mobile phones
Mobile phones can affect the correct function of the instrument.
• Do not use mobile phones next to a running instrument.
Laboratory equipment
The instrument has been designed and developed as laboratory equipment in
accordance to the requirements of the EC directive 98/79/EC (IVD directive, directive
98/79/EC of the European Parliament and of the Council of 27 October 1998 on in
vitro diagnostic medical devices). In order to assure compliance, applicable
standards recorded in the list of standards harmonized for the IVD directive were
observed. The application of this product for in vitro diagnostics purposes requires
a separate conformity assessment according to EC directive 98/79/EC for the
complete system into which it will be incorporated and/or has to be used in
combination with (e.g. reagent).