User's Manual

MAINTENANCE AND SERVICE
SERVICE
KleeYa - User Manual - Version 2 5-11
5.3 SERVICE
5.3.1 TUBE AND SAMPLE RACK
SPECIFICATIONS
Each tube type (see chapter 3.4.1 on page 3-43) requires a dedicated sample rack type
with a specific label and in special cases also with spacers:
• Sample rack types (label) (see chapter 5.3.1.1 on page 5-11)
• Spacers for sample racks (see chapter 5.3.1.2 on page 5-14)
5.3.1.1 SAMPLE RACK TYPES (LABEL)
Each tube type requires a dedicated sample rack type. The sample rack must be
labeled with the respective rack label according to the sample tubes that shall be
used within the rack. Only the tubes of this type can be used within each rack type.