User's Manual

MAINTENANCE AND SERVICE
MAINTENANCE AND CLEANING
KleeYa - User Manual - Version 2 5-9
8. Put the cap (1) on the additional intermediate container and tighten it loosely.
9. Prime the steel needle (SPOLV) (cleaning):
a. Start the maintenance task "Prime Pipettor".
b. Wait 5 minutes after finishing the task.
c. Repeat the cleaning procedure 3 times in total.
10. Open the cap (1) of the additional intermediate wash buffer container.
11. Put the cap (1) on the intermediate system liquid container (2) and tighten it
by hand.
12. Prime the steel needle (SPOLV) (flushing):
a. Start the maintenance task "Prime Pipettor".
b. Wait 1 minutes after finishing the task.
c. Repeat the cleaning procedure 6 times in total.
13. Close the wash buffer/system liquid containers drawer.
14. Remove the additional intermediate container.