User's Manual

5-2 KleeYa - User Manual - Version 2
MAINTENANCE AND SERVICE
SAFETY AND HINTS ABOUT CLEANING/DECONTAMINATION
Unapproved or improper maintenance work
Unapproved or improper carried out maintenance work will result in serious
personal injury and material damage.
• Follow all safety instructions in chapter 1.4 on page 1-8 and this chapter.
• Take off watches and jewelry before performing any maintenance works.
• Only perform maintenance procedures described in this manual.
• Closely follow the steps contained in the individual instructions.
• For maintenance, only use the parts mentioned in this instruction.
• Tests and maintenance specified by the manufacturer shall be performed to
ensure the safe operation of the instrument and the proper functioning of the
instrument.
• All service and maintenance which are not described in this instruction shall
be performed by qualified and authorized field service engineers.
• Any changes made to the instrument that are not authorized by the
manufacturer will void the manufacturer’s warranty.
Cleaning, disinfection or decontamination
Observe the following aspects during cleaning, disinfection or decontamination
because otherwise breakdowns or damage can be the result.
• Disinfect or decontaminate components with a suitable disinfection or
decontamination method.
• Only use liquid cleaning, disinfection or decontamination solutions with a
moistened cleaning tissue.
• Use only approved cleaning, disinfection or decontamination solutions and
methods.
• Avoid cleaning, disinfection or decontamination solutions to come into
contact with bearings and guides, as otherwise the greasy film may dissolve!
• Do not use cleaning, disinfection or decontamination solutions in the
proximity of circuit boards, light barriers and acrylic glass surfaces!
• Do not pour or spray liquid cleaning, disinfection or decontamination
solutions into the instrument.
• Do not autoclave containers and components for liquids or waste.
Handling and cleaning of optical surfaces
Improper optical surfaces (e. g. camera, lenses, sensors) could generally degrade the
quality of images, data, etc.
• Do not touch any optical surfaces.
• Only clean the optical surfaces with a soft and lint-free cloth.
• Do not use any aggressive detergents or solutions (e.g. acetone).