User's Manual

INTRODUCTION
SAFETY INSTRUCTIONS
KleeYa - User Manual - Version 2 1-9
1.4.1 GENERAL SAFETY
Non-observance of safety instructions
The non-observance of safety instructions may result in serious personal injury and
material damage.
• Follow all safety instructions included in this manual.
• Follow all warnings marked on the instrument.
Improper use of the instrument
Improper use of the instrument can cause personal injury, produce erroneous
results and produce damage to the instrument.
• The handling and maintenance of the instrument shall be performed only by
trained and authorized personnel.
• Before operating the instrument, the instruction for use manual shall be
completely read and understood.
• Only use the instrument in accordance with the intended use as described in
this manual.
• Use only the approved consumables and accessories described herein (e. g.
Anchor® Tips, cuvettes etc.).
• The manufacturer assumes no liability for any damage, including those to
third parties, caused by improper use or handling of the instrument.
Missing, improperly opened, damaged or opened protective covers
To avoid serious injuries with deadly consequences due to electric shock or injuries
by the instrument (e.g. contusion, cuts etc.), protective covers may only be opened
or removed for certain maintenance procedures and with the highest level of
caution.
• Only perform maintenance procedures described in this manual.
• Make sure that nobody is working on the instrument and that all covers are
attached and closed before reconnecting the instrument to the mains supply.
• Make sure that all covers are attached and intact before switching on the
instrument.
• Switch off the instrument, separate it from the mains supply and protect the
instrument against restarting, if protective covers/gears are missing or
damaged.
• Make sure that the motion of the pipettors or incubator has stopped before
opening covers and/or accessing the working area of the instrument.
• Avoid touching the pipettors or incubator and other moving parts while the
instrument is in operation.
• Perform all maintenance procedures with the highest level of caution.