User's Manual

4-6 KleeYa - User Manual - Version 2
USE OF THE INSTRUMENT
LOAD SAMPLES AND REAGENTS
4.5 LOAD SAMPLES AND
REAGENTS
1. Tap on the Load button in the main menu bar to show the Load screen.
2. Tap on the Samples button below the Load button.
3. Load all test tubes into sample rack(s).
4. Load the sample rack(s), one after the other, into the sample loading bay (see
chapter 3.4.1 on page 3-43) .
5. If necessary, assign desired tests and dilutions to the samples.
6. Tap on the Reagents button below the Load button.
7. Load all necessary Reagent Cartridges into reagent rack(s).
8. Load the reagent rack(s), one after the other, into the reagent loading bay (see
chapter 3.4.2 on page 3-55) .
4.6 START TEST RUN
1. Tap on the Start button to start the test run.