User's Manual

4-2 KleeYa - User Manual - Version 2
USE OF THE INSTRUMENT
BRIEF SEQUENCE PLAN
4.2 BRIEF SEQUENCE PLAN
Start-up • Switch on the instrument
• Switch on the PC.
chapter 4.3 on page 4-3
Preparations • Load full Dispense Cartridges:
• Load cuvette stacks
• Anchor® Tips:
• Unload empty Anchor® Tip trays
• Load full Anchor® Tip trays
• Fill wash buffer container with wash
buffer
• Fill system liquid containers with
purified water
• Waste:
• Empty liquid waste containers
• Empty solid waste bag
• Run open maintenance tasks.
chapter 4.4 on page 4-4
Load reagents and samples • Load test tube rack(s)
• Assign tests
• Load reagent rack(s)
chapter 4.5 on page 4-6
Start test run • Start test run chapter 4.6 on page 4-6
Results • View results chapter 4.7 on page 4-7
Unload and reload samples and
reagents
• Unload finished test tube rack(s)
• Reload test tube racks
chapter 4.8 on page 4-8
Reload resources • Reload resources chapter 4.9 on page 4-9
Event/error messages and
special tasks
• Event/error messages
• Maintenance tasks
chapter 4.10 on page 4-10
Shut down • Shut the PC down
• Switch the instrument off
chapter 4.11 on page 4-11