User's Manual

3-86 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
DEFINITIONS
Show details of a control/edit a control:
1. Tap on the desired control in the table.
2. Tap on the Details button
(see chapter 3.7.3.1 on page 3-86)
.
Delete a control:
1. Tap on the desired control in the table.
2. Tap on the Delete button.
3.7.3.1 DETAILS OF A CONTROL
The details screen shows all settings and assignments of a control.
Figure 3-71: Details screen
General Parameters field:
Name Name of the control.
Type Routine control or control of a Kit.
Lot Number LOT number of the kit.
Must be entered for kit control and can be empty for
routine control.
Controls are provided by various vendors. The system
provides the possibility to define either controls
connected to kit loaded on the instrument (lot number
mandatory, kit control) or to define external controls
from different vendors (routine).
For details on the controls please refer to the
instruction for use provided by the vendor of the
control.
Only Controls with Lot number will be transfered to QC
now. Enter any number for routine controls that shall
be transferred to QC now.