User's Manual

3-80 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
DEFINITIONS
Functions of the Trigger 1 + 2 field:
Functions of the Calibration Curve Lot Matching field:
Parameters sub tab (shows laboratory specific parameters):
Figure 3-70: Parameters sub tab
Functions of the User Unit field:
Vendor Shows the supplier of the assay.
Sample Replicates Number of sample replicates.
Version Information Versions information entered by assay developer.
Description Assay description entered by assay developer.
Require Same Lot
Number
Allows to check the trigger LOT numbers. The assay is
then only executed if the LOT numbers match.
Vendor ID ID of the supplier.
Same Reagent Lot Allows to check the reagents LOT numbers. The assay is
then only executed if the LOT numbers match.
Same Trigger Lot Allows to check the trigger LOT numbers. The assay is
then only executed if the LOT numbers match.
Same Recalibrator Lot Allows to check the recalibrator LOT numbers. The
assay is then only executed if the LOT numbers match.
Enable Enables laboratory specific unit different from the unit
set by the assay developer.
User Unit Unit that will be shown for assay results.
User Concentration Factor for conversion from unit to user unit