User's Manual

BASIC FUNCTIONS
MAINTENANCE
KleeYa - User Manual - Version 2 3-77
3.6.1 RUN OF A MAINTENANCE TASK
The Perform Task window shows details of a running maintenance task.
Figure 3-68: Perform Task window
PROCEDURE
1. Tap on the Maintenance button in the main menu bar to show the
Maintenance screen.
2. Select one or more maintenance tasks
3. Tap on the Run Task button below the table to start the maintenance task(s).
4. Follow the maintenance instructions (step) on the screen.
5. Tap on the Next Step button to go to the next maintenance step.
6. Repeat the previous step for all maintenance steps.
7. Tap on the Close button after the last maintenance step.
Lock Log off button to log off the current user. Started
maintenance tests are executed further. Another user
cannot use the instrument during this log off time.
Next Step Some tasks may require confirmation before they are
run. For example if results are deleted from view by
execution of a maintenance task a message is shown
and confirmation is given by tapping the Next Step
button.
Cancel Cancel the current running maintenance task. After
canceling a maintenance task, the instrument starts
initialization.
Close Closes the window after processing or canceling.