User's Manual

3-76 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
MAINTENANCE
PROCEDURE
1. Tap on the Maintenance button in the main menu bar to show the
Maintenance screen.
2. Tap on a button below the table to call various functions:
Note that depending on the number of selected maintenance tasks, not all
functions are available.
See chapter 3.5.1 on page 3-61 for using filters or setting table columns.
Status of the Last Run Shows the state of the last run.
Allows the use of filters (see chapter 3.5.1.1 on page 3-61) .
Allows to configure the table columns (see chapter 3.5.1.2
on page 3-62) .
Import Allows to import (new) maintenance tasks.
Tasks with an existing name cannot be imported. In this
case, the existing task must be deleted before it can be
imported.
Show Log Switches to the Event Log screen (see chapter 3.5.5 on
page 3-72) .
Print Prints the maintenance tasks on the standard printer.
Run Task Allows to start one or more selected maintenance tasks
(see chapter 3.6.1 on page 3-77) .