User's Manual

3-66 KleeYa - User Manual - Version 2
BASIC FUNCTIONS
RESULTS
Functions (depending on the selected group):
Location Shows the sample position (Lane, Position).
Mean Conc. Shows the mean concentration of all replicates of the
sample for this assay.
Mean Response Shows the mean RLU value of all replicates of the
sample for this assay (dark count corrected value).
Reagent Lots Shows the lot number of the Reagent Cartridge(s).
Replicate Conc. Shows the concentration of the sample in the unit
defined by the assay developer.
Replicate Response Shows the RLU value of the sample (dark count
corrected value).
Result Label Shows all result labels.
Sample Type Shows the sample type (Specimen, Control, Calibrator,
Recalibrator).
SD Conc. Shows the standard deviation of the concentrations of
all replicates of the sample.
SD Response Shows the standard deviation of the response values of
all replicates of the sample.
Test Order ID Shows the test order ID (consecutive number).
The Raw RLU Shows the raw RLU value without dark count
correction.
Unit Shows the concentration unit defined by the assay
developer.
Used Reagents Shows the names of all used reagents.
User Concentration Shows the concentration of the sample in the user unit
defined in Definitions > Assays > General > Parameters.
User Name Shows the user who started the test.
User Unit Shows the user unit defined in Definitions > Assays >
General > Parameters.
Select all Select all run results.
Unselect all Unselect all run results.
Automatic Replicates
Selection
Selects all run result replicates of a sample.
Recalculate with
Different Curve
Allows to recalculate the selected result with an other
calibration curve. The result must be generated within
the recalculation period which is set in the assay
definition by the assay developer.
Export Exports all selected run results as ".csv" file.