User's Manual

BASIC FUNCTIONS
RESULTS
KleeYa - User Manual - Version 2 3-65
Table (depending on the selected group and column configuration):
Further columns that can be selected via the configure column function:
Selected Allows to select one or more result lines.
Sample ID Shows the ID of the sample, calibrator, or control.
Assay Shows the assay used for the test.
If several tests have been made with one sample, the
test results appear in separate lines.
Estimated Time to
Result
Shows until when the test result is expected.
Completion Date Shows when the test result was available.
Result Flags Shows all result flags.
Result Status Shows the status of the test result.
Job Status Shows the current test status (e.g. Finished).
Flags Shows the number of flags for the test.
Errors Shows the errors that occurred during the test.
%CV Conc Shows the %CV value of the concentration of all
replicates for this assay.
%CV Response Shows the %CV value of the replicate response
calculated from all replicates for this assay.
Batch ID Shows the batch ID (consecutive number).
Batch Name Shows the batch name „Batch dd/mm/yyyy hh:mm“.
Calibration Curve ID Shows the ID of the calibration curve that was used for
result generation.
Carrier Barcode Shows the sample rack type.
DarkCount /s in RLU Shows the dark count value per second. Background
value of the measurement unit which is used to correct
the RLU value (Response = Raw RLU – Dark count). Dark
count measurement is done for 0.5 s before each
measurement.
Date Curve Created Date and time when the calibration curve was created
that was used for result calculation.
Dilution Description Shows the dilution description „1:dilution factor“.
Dilution Factor Shows the dilution factor.
Instrument Serial
Number
Shows the serial number of the instrument.
Job ID Shows the Job ID (consecutive number).
Job Start Cycle Shows the Job Start Cycle (consecutive number).