Full Product Manual

BROCGNI
«
SCAN THIS QR CODE TO FIND A STRATCO NEAR YOU
[phone]
stratcousa.com
All brands and logos/images accompanied by ® or ™ are trade marks of Stratco (Australia) Pty Limited. ® Copyright August 2019
FREQUENTLY ASKED QUESTIONS
when you push them into the ‘U’ channel. You insert a
spacer, provided in the Slat Box, to keep the separation
between the slats uniform and there is a ‘post insert’ to fill in
any gap at the top or bottom of the ‘U’ channel once all of
the slats have been put in place. The top of the post is then
capped o with a post cap to provide a nice neat finish.
Q: Do I need to purchase a base plate kit?
A: If you intend to concrete your post directly into the soil
then you will not need a base plate kit. The base plate kit is
only required when you intend to install your fence directly
onto an existing concrete or other rigid base. If you will be
installing the post onto an area that has brick or concrete
paving blocks it is recommended that the paving blocks be
removed and the post be mounted into a concrete footing
and the paving blocks be replaced and cut to fit around the
post.
Q: Can I leave soil and mulch in direct contact with the
screen once it has been installed?
A: Soil and mulch should not be left in contact with the
product as this may result in the finish of the product to
rapidly deteriorate. If installing the post into a concrete
footing the footing should be sloped to encourage water to
drain away from the post