Full Product Manual

QUICKSCREEN PLUS DESIGN GUIDE
1-way Post
1
Slats
2-way Post
Slats
2
Slats
Slats
2
Slats
Sideframe
Slats
Existing Wall
S
S
1-way Post
1
Slats
S
Sideframe
Slats
1
Slats
1
GG
Gate Slats
1-Way Post 1-Way Post
MIDDLE OF FENCE RUN
Use 2-Way Posts to join two panels in a straight line.
END/START OF FENCE RUN
Use 1-Way Posts to start and end a fence run. Posts are to
be fixed to the ground using either Base Plates (for fixing to
concrete slabs or other hard surfaces) or by concreting the
post in place.
JOINING FENCE RUN TO EXISTING WALL
Use Sideframe to join panels to existing walls or existing
posts.
CREATING A 90° CORNER
Use a combination of a Sideframe and 1-Way Post to create
a 90° corner between two fence panels.
ADDING A GATE
Gates must be attached using latch and hinge hardware
(sold separately) to either one way posts or existing walls.
GG
Gate
Existing Wall Existing Wall
QUICKSCREEN PLUS DESIGN GUIDE
The following design guide is to be used to assist in the design of a fencing layout. Once the layout of a design has been
finalised, the exact number and type of boxes can be selected.