User's Manual

Using Objet Studio
5–50
DOC-06800 Rev. A
Printing the
Tray File
When a tray is ready to be printed, it is placed in the Jobs Queue. When the
job reaches the head of the queue, Objet Studio pre processes the tray file to
create slices, and feeds them to the 3 D printer.
To send the tray to the print queue:
1. On the Tray Settings ribbon, Build Process group, click .
two model
materials
Figure 5-70: Job Summary when printing with multiple model materials
Note: The values displayed are the result of a quick calculation, and
represent a rough estimate of the materials and time input required
to print the job. For a more accurate calculation, click
Fine
Estimation
.
Continue with step 4 on page 5 53.
•
If printing the tray requires only one model material, the Printing
Mode Selection dialog box opens.
Figure 5-71: Printing Mode Selection dialog box
Note: The values displayed are the result of a quick calculation, and
represent a rough estimate of the materials and time input required
to print the job. For a more accurate calculation, click
Fine
Estimation
.
Printing-Mode
Selection
2. Select the appropriate printing mode.
•
If you require the job to be printed in High Quality mode, select this
option.
Note:The availability of High Quality mode depends on the material
selected.
D R A F T
16 June
2013