User's Manual

Using Objet Studio
5–28
DOC-06800 Rev. A
Figure 5-34: Tray arrangement after applying Automatic Placement
Manual
Positioning
You can change the position of objects on the build trayeven if they were
inserted with the Orient Automatically option. Considerations for
positioning objects are presented in Model Orientation, below. Tools for
changing the position of objects are presented in Manipulating Objects on
the Build Tray on page 5 30.
•
For best results arrange the tray with Automatic Placement, on the Tray
Settings ribbon, even if you inserted the objects with the Orient
Automatically option.
•
The physical characteristics of each type of model material you use can
affect the positioning of objects on the build tray. Therefore, select the
material before running Automatic Placement.
D R A F T
16 June
2013