User's Manual

Using Objet Studio
5–24
DOC-06800 Rev. A
3. Select
Coat With
and, from the pull down menu, select the coating
material.
Figure 5-29: Coating material selected
4. In the Thickness field, enter a coating thickness between 0.3 and 3
millimeters.
Note: The coating thickness does not affect the external dimensions of the
object, which remain unchanged. The coating layer replaces part of
the main model material.
5. Click
Apply
.
Note: When you de-select objects, they are displayed, by default, with
colors representing the model-material. Even after adding a coating
to an object, its color remains that of the main material, not the color
of the coating material.
To inspect, modify or remove the coating applied to an object:
1. On the Model Toolbar or the Model Settings ribbon, click .
The Coat with dialog box opens.
2. Perform one of the following actions
•
Change the coating settings, and click
Apply
.
•
To remove the coating, clear the Coat With check box and click
Apply
.
•
To keep the current coating settings, click
Apply
or
Cancel
.
D R A F T
16 June
2013