User's Manual

DOC-06800 Rev. A
5–15
Objet1000 - Connex 2 User Guide
STL file loading
preference
If there are identically named stl files in more than one location, you need
to ensure that the correct component stl files are linked to the objtf file. For
example, if there are identically named stl files on one drive and on a flash
drive (this can occur if you copy the original files to a working folder), you
can set the default location from which files are loaded.
To set the Load Order:
1. From the Tools menu, select
Options
.
or
In the Objet Studio Commands Menu, click
Options
.
2. In the Options dialog box, display the Settings tab.
Figure 5-16: Options dialog box, Settings tab
3. Under Load Search Order, select an option:
•
Local
to load files from the location where they were last saved.
•
Original
to load files in their original location.
4. Click
OK
.
D R A F T
16 June
2013