User's Manual

DOC-06800 Rev. A
6–45
Objet1000 - Connex 2 User Guide
11. Replace the lamp cover by inserting it into the slot on the bottom of the
housing, and tighten the securing screw on top.
Figure 6-63: Replacing the lamp cover
12. Reconnect the power and heat fuse connectors.
Figure 6-64: Connecting the UV lamp
13. In the wizard screen, confirm that you have replaced the lamp(s) and
that the black strip is attached, then click
Next
.
Figure 6-65: UV-installation confirmation screen
D R A F T
16 June
2013