User's Manual
Table Of Contents
- Operating & Maintaining the Connex500/350 3-D Printer
- Starting the Connex Printer
- Loading Model and Support Cartridges
- Producing Models
- Resuming Production After Printing has Stopped
- Changing the Model Material
- Keeping the Connex Printer in Idle Mode
- Shutting Down the Connex Printer
- Maintaining the Connex Printer
- Routine Maintenance Schedule
- Cleaning the Print Heads
- Pattern Test
- Improving Print Quality
- Cleaning and Replacing the Wiper
- Cleaning the Roller Waste Collector and Inspecting the Roller Scraper (Knife)
- Replacing the Roller Scraper (Knife)
- Aligning the Print Heads
- Calibrating Print Heads
- Replacing Print Heads
- Testing and Calibrating the UV Lamps
- Calibrating the Load Cells
- Replacing the Odor Filter
- Replacing the UV Lamps
- Built-in Tests
- Replacing the Waste Container
- Cleaning the Exterior Panels
- Handling Printed Models
Operating & Maintaining the Connex500/350 3-D Printer
7–38
DOC-13000 Rev. E
Figure 7-54: Measuring the missing line in a printed sample
Intheexampleabove,youwouldenter“1”inthewizardscreen.
b. Carefullyremovethesample,weighit,andentertheweightinthe
wizardscreen.
Besuretoremoveandweightheentiresample,evenifitbreaksinto
severalpieces.
c. ClickApplyorpressEnter.
Thedata‐entry‐indicator movestothenextpos
ition.
d. Repeatthesestepsforall32samples.
To change an entry, click Edit Data, enter the correct data, and click Save.
17. Whenyouhaveenteredtheallofthedatainthewizardscreen,
click
Next.
Thewizardusesthedatayouenteredtoanalyzetheconditionofthe
printheads,andoptimizesthemsotheyprintmodelswithauniform
layerofmaterial.Iftheheadsareinsatisfactorycondition,thefinal
wizardscreenappears.
Figure 7-55: Final wizard screen, after optimizing print heads
Missing line
Printed sample
Ruler