User's Manual

DOC-13000 Rev. E 6–5
Connex500/350 User Guide
Tosende‐mailandSMSmessages,makesurethate‐mailsoftware 
supportingMAPIisinstalledontheprinter’sservercomputer.TosendSMS
messages,thecellularphoneservicemustsupportthetransmissionofe‐
mailmessagesbySMS.WithSMSalerts,onlythesubjectlineofthee‐mail
mess
ageistransmitted.
Note: In
the e-mail program, make sure the security settings are set to
“low” and add the server Job Manager to the “trusted” list (select
Tools > Options, Security tab).
To configure Job Manager to send notifications and alerts for your jobs:
1. ClickorselectReportfromthe3‐DPrintermenu.
ThePreferences/Reportsdialogboxopens.
Figure 6-3: User alerts settings
2. Fore‐mailandSMSalerts,clickAdd Recipientintherespective
sections.
3. Tochoose theeventsreportedtoyoubyJobManager,click
Detailsin
therelevantsections.
Figure 6-4: Event selection for alerts
4. SelectthedesiredeventsforsendingalertsandclickOK.
The parameters for “Low level of material” alerts are set on the printer’s
server computer.