User's Manual

Using Job Manager
6–4 DOC-13000 Rev. E
Job Manager
Operations
Evenaftersendingabuildtraytothe3‐Dprinter,youcaninspectthetray—
andmakechangestoit,ifnecessary—aslongasitisstillintheprintqueue.
To inspect the build tray:
1. Selectthejob.
2. ClicktheEditJobiconoropentheJobmenuandselect
Edit.
ObjetStudioopens,displayingthebuildtray.Tomakechangestoit,see
“MakingchangestoaJob”onpage 6‐9.
ThefollowingoperationsareavailablefromtheclientJobManager
interface:
The3‐DprinterStatusscreenenablesclientstomonitortheprogressof
printingjobs.Todisplaythescreen,clicktheMa
chineStatusicon .
Configuring
User Alerts
JobManagercanalertyouandotherstothestatusofthejobssenttothe
serverforprinting.Thefollowingeventscanbereported:
• Thelevelofmodelorsupportmaterialislow.
• Thejobwasinterrupted.
• Thejobwascompletedsuccessfully.
Icon Menu Option Purpose
3‐DPrinter>
NewJob
LaunchesObjetStudio;topreparenewtrays.
3‐DPrinter>
SetPrinter
Displaysanetwork‐browsingdialogbox,to
connecttoanObjetservercomputer.Tospecify
acomputer,itmustbeoperatingand
connectedtothelocalnetwork.
—— Displaysthestatus ofthe3‐Dprinter.
3‐DPrin
ter>Report Displaysoptionsforusermessagesand alerts
(paperprinter,e‐mail,SMS—see“Configuring
UserAlerts”onpage 6‐4).
Job>Delete... Removestheselectedjobfromthe queue.
Job>View… Opensawindowdisplayingtheselectedtray.
Inthiswindow,youcanviewthetrayfrom
differentangles.
Job>Properties
Op
ensawindowdisplayingthepropertiesof
theselectedmodel.
Job>Edit LaunchesObjetStudioandloadsthecurrent
tray,toenablemakingchangestothetrayafter
itissenttotheserverbutbeforeitisprinted.
Help>About... DisplaystheJobManagerversion.