User's Manual

Using Job Manager
6–2 DOC-13000 Rev. E
TheJobManagerapplicationisdifferentforclientworkstationsandforthe
computerconnecteddirectlytothe3‐Dprinter.
• JobManagerinstalledonclientcomputersdisplaysthequeueand
statusonlyforjobssenttothe3‐Dprinterserverfromthatcomputer,
andallowstheusertoeditonlythesejobs.
• JobManagerinstalledonthecomputerdirectlyconnectedtoaspecific
3‐Dprinterdisplaysthequeueandstatusforalljobssenttothat3‐D
printerbyclientcomputersonthenetwork.Italsoallowseditingand
manipulationofalljobs,andenablesre‐sendingpreviously‐printed
jobstotheprinter.
Client Job Manager
WhenyouopentheclientObjetStudio/JobManagersoftwareforthefirst
time,adialogboxopenspromptingyoutoconnecttoanObjetserver
computer.Todothis,theservercomputermustbeoperatingandconnected
tothelocalnetwork.
¾ ClickBrowsetofindandselectthenameoftherequiredserver
computerandthenclick
OKtoclosethedialogbox.
Figure 6-1: Server connection dialog box
To change the server-computer connection (to connect to another
printer):
¾
FromtheJobManagerscreen,clicktheConnecticononthetoolbar,
oropenthe3‐DPrintermenuandselect
Set Printer.
If there are several Connex printers on the local network, client computers
can connect to any of them, but only one at a time.