User's Manual

DOC-13000 Rev. E 5–43
Connex500/350 User Guide
Advanced-Mode Features
TheObjetStudiofeaturesdescribedinthissectionareonlyaccessibleifthe
applicationissettoAdvancedmode.
To see the current Objet Studio setting:
¾
OpentheToolsmenu.
Figure 5-63: Tools menu, showing Advanced mode selected
IfAdvancedischecked,theadvancedfeaturesareenabled.
To change the Advanced setting:
1. ClickAdvancedintheToolsmenu.
Thefollowingmessageisdisplayed,remindingyouthatthechange
willonlytakeeffectthenexttimeyouopenObjetStudio—eventhough
thecheckmarkintheToolsmenuappears/disappearsafteryoumake
thechange.
Figure 5-64: Configuration-change message
2. Closeandre‐openObjetStudiotoaccesstheAdvancedmodefeatures.