User's Manual

DOC-13000 Rev. E 5–29
Connex500/350 User Guide
Displaying
Large Files
Verylargestlfilescanbeslowtodisplayandmaybedifficulttomanipulate
easilyonthebuildtray.Ifthisisthecase,youcandisplayjustanimageof
theobjectonthebuildtraywithoutloadingtheentirefile.Thestlfileitself
isnotchanged,andtheco
mpletefileissenttotheprinter
.
To display an image of stl files when you place objects on the build tray:
1. FromtheToolsmenu,selectOptions,anddisplaytheSettingstab.
Figure 5-47: Options dialog box, Settings tab
2. IntheLargeFilessection,selectLoad Partial.(Load Fullisthedefault
setting.)