User's Manual

DOC-13000 Rev. E 5–27
Connex500/350 User Guide
To display the build tray in wire frame view:
¾
SelectView> WireFrameorclicktheWireFrameicon .
Figure 5-42: Tray and model displayed in Wire frame view
To revert to the shaded view:
¾
SelectView > ShadedorclicktheShadedicon .
To display objects as boxes, showing their maximum dimensions
instead of the model geometry:
¾
SelectView > Display Bounding Box.
Figure 5-43: Model displayed with bounding box
To display the area around objects needed for support material (to
produce a matte finish):
¾
SelectView > Display Thickening Box.
Figure 5-44: Model displayed with thickening box