User's Manual

DOC-13000 Rev. E 5–21
Connex500/350 User Guide
Figure 5-33: Object properties dialog box, Transform tab
Youcanmakeprecisechangestoanobjectonthebuildtraybyselectingthe
object(eitheronthetrayorinthetrayhierarchypane),changingitsvalues
inthedialogbox,andclicking
Change Units.
Note: You can only change the height of the objects on the build tray if this
is allowed by the Objet Studio settings (see “Object Position on the
Z-Axis” on page 5-19.)
ThepropertiesdisplayedintheTransformtaboftheobjectpropertiesdialog
boxareabsolutevalues,representingtheactualpositionoftheobjectonthe
buildtray.Anotherwayofrepositioningobjectsonthetrayusingprecise
valuesisbyapplyingchangestoobjectpropertiesrelativetothecurrent
posi
tion.Therearetw
oRelativeTransformdialogboxesavailable:
• TheR.Transtaboftheobjectpropertiesdialogbox.
Figure 5-34: Object properties dialog box, R. Trans tab
• TheRelativeTransformdialogbox,accessiblefromtheObjectmenu.
Figure 5-35: Relative Transform dialog box