User's Manual

DOC-13000 Rev. E 5–17
Connex500/350 User Guide
Figure 5-30: Tray before objects are properly arranged
Figure 5-31: Tray after objects have been automatically arranged
Manual
Positioning
Youcanmanuallypositionobjectsonthebuildtray—eveniftheywere
insertedusingautomaticplacement(withtheArrangemodelsoption
selectedintheInsertdialogbox).Considerationsforpositioningobjectsare
reviewedin“ModelOrientation”onpage 5‐18.Toolsforchangingthe
positionofobjectsaredescribedin“RepositioningObjects”onpage 5‐20.
Because of the unique characteristics of each type of modeling material, it
is recommended that you select the material before inserting objects on the
tray with automatic positioning or running Automatic Placement.