User's Manual

Introducing the Connex 3-D Printing System
3–8 DOC-13000 Rev. E
Workstation Requirements
TheminimumrequirementsforcomputercomponentsusedwithObjet3‐D
printersoftwarearelistedinthefollowingtable.
*Alsosupported:
 Windows7(32‐bit/64‐bit),Professional,Ultimate,Enterpriseeditions
 WindowsVista(32‐bit/64‐bit)Ultimate,Business,Enterpriseeditions
Note: On 64-bit operating systems, Objet Studio runs as a 32-bit
application.
Recommendations:
• Monitorresolution:1280x1024pixels
• Colorquality:32bit
• TwoEthernetports
Server/
Stand-alone Station
Client Workstation
Processor
Pentium4,3.0GHz,
512KBcachememory(min.)
Pentium4,3.0GHz(min.)
Operating System*
WindowsXPProfessional Windows XPProfessional
Graphics Card
SupportingopenGL,
with512MBofmemory
SupportingopenGL,
with512MBofmemory
RAM
4GB(min.) 2GB(min.)
CD Drive
IDECDROM IDECDROM
Hard-Disk Drive
40GB(min.) 40GB(min.)
Network Adaptor
Cards
LANTCP/IP(2) LANTCP/IP(1)
Ethernet Cables
•Straight‐throughcable(1)
•Crossovercable(1,supplied)
Straight‐throughcable(1)