User's Manual

DOC-13000 Rev. E 3–7
Connex500/350 User Guide
Safety
Considerations
Beforebeingcured,resinsarehazardousmaterials.Topreventpossible
healthhazards,followtheseprecautionsregardingprintingmaterials:
• Donotexposetoflames,heatorsparks.
• Preventcontactwithskinandeyes.
• Ventilateareaswheretheyarehandled.
• Keepthemseparatefromfoodanddrink.
Curedplasticparts,however,aresafe.Theycanbehandledandstored
withoutprecautions.
Disposal
DisposeofcartridgesofObjetmodelandsupportmaterialinaccordance
withallapplicablelawsandregulations.Ifnecessary,thecartridgescanbe
disassembledforrecycling.
Work Environment
Extremeheatandhumidityconditionscanadverselyaffecttheoperationof
theConnex3‐Dprinter.Therefore,itisrecommendedthatyouuse
ventilationorair‐conditioningsystems,ifnecessary,tokeeptheworkarea
withinthefollowingranges:
• 18°–22°C(64°–71°F)
• 30%–70%relativehumidity
You can find more safety information about resins in “Safety Guidelines” on
page 2-4, and “First Aid for Working with Printing Materials” on page 2-6.