User's Manual

Safety
2–2 DOC-13000 Rev. E
Safety Features
Connex3‐DprintersaredesignedtocomplywithCEandFCCstandards.
Theyareequippedwiththefollowingsafetyfeatures:
Coverinterlock
switch
ThepowersuppliedtotheUVlampandthe
motionmotorsisturnedoffwhenthecoveris
opened.
WARNING:Donotdefeat(override) the
interlockswitch.Doingsocouldresultin
seriouspersonalinjury.Iftheinterlockswitch
doesnotfunctioncorrectly,donotusethe
printer,andcontactyourservic
eprovider.
Coverlock Thecoverislockedwhiletheprinteris
working.Itisreleasedwhentheprinterreverts
topauseorstopmode.
WARNING:Donotdefeat(override) the
safetylock.Doingsocouldresultinserious
personalinjury.Ifthesafetylockdoesnot
functioncorrectly,donotusetheprinter,and
contactyou
rserviceprovider.
UVscreen Thetransparentsectionofthecoverblocks
harmfulUVradiation,allowingtheoperatorto
viewthemodelasitisbeingmade.
Circuitbreaker Thepowertotheprinteristurnedoffincaseof
electricalovercurrent.
Note: The circuit breaker is only accessible to
service personnel.
Groundedchassis Thechassisoftheprinterisgrounded,to
preventelectricalshock.
Note: The power outlet must be properly
grounded, in accordance with the local
electric code, to provide this protection.
If the Connex 3-D printing system is not used as specified in this guide, the
safety features may not provide adequate protection.