User's Manual

Using Objet Studio
5–62 DOC-07000 Rev. A
Off-line Mode
YoucanuseObjetStudiotopreparetraysforprintinginoff‐linemode,on
aremotecomputerorwhentheprinterconnectionisnotavailable.Youalso
useoff‐linemodetopreparetraysforprintingwithotherprinters.Inthis
case,ifObjetStudioiscurrentlyconnectedtoa
printer,youmustchangeto
off‐linemodebyremovingthisconnection.
To disconnect Objet Studio from the printer:
1. OntheJobManagerribbon,inthe3DPrintergroup,click.
2. IntheSetPrinterdialogbox,click
Connect.
Figure 5-59: Disconnecting Objet Studio from a printer (A)
3. PrinterConnectiondialogbox,deletethecomputername/IPaddress.
Figure 5-60: Disconnecting Objet Studio from a printer (B)
4. ClickOK.
“Unknown”appearsintheprinter‐namefield.
5. Click
OK.
6. Inthepop‐upmess age, confirmthatyouwanttoworkinoff‐linemode
byclickingNo.
WhenObjetStudioisinoff‐linemode,youcanconfigureitforpreparing
printjobsfordifferentprinters.