User's Manual

DOC-07000 Rev. A 5–59
Objet500 - Connex 3 User Guide
Monitoring and Managing Print Jobs
IntheJobManagerscreenofObjetStudio,youmonitorandmanagejobs
senttotheprinter.ThereareafewdifferencesbetweenObjetStudioon
clientworkstationsandonthecomputerconnecteddirectlytothe3‐D
printer—theserverworkstation.
• ObjetStudioinstalledonaclientcomputeronlydisplaysthequeueand
statusforjobssenttothe3‐Dprinterserverfromthatcomputer,andit
allowstheusertoeditonlythesejobs.
Note: If there are several Objet printers on the local network, client
computers can connect to any of them, but only one at a time.
• ObjetStudioinstalledonthecomputerdirectlyconnectedtoaspecific
3‐Dprinter(server),displaysthequeueandstatusforalljobssentto
that3‐Dprinterbytheserverandbyallclientcomputersonthe
network.Italsoallowseditingandmanipulationofalljobs,andenables

re‐sendingpreviously‐printedjobstotheprinter.
Job Manager
Screen
TheJobManagerscreenontheclientandserverworkstationslooks
identical.Theonlydifferenceisthatoptionsonlyrelevanttotheserver
workstationaredisabledforclientinstallations.
Figure 5-58: Job Manager screen
TheJobManagerscreenisdividedintopanels:
• JobsQueue
• PrintTime
• History
• AvailableResources
• MaterialConsumption
• TrayPreview
• Waste
If Objet Studio is not connected to a printer (or printer server), you can
prepare tray files for any Objet printer. Later, these files can be used by
Objet Studio on the appropriate printer server.