User's Manual

DOC-07000 Rev. A 5–31
Objet500 - Connex 3 User Guide
3. Ifyouclickonacorneroftheframe,thecursorchangestoindicatethat
theobjectcanberotated.
Figure 5-27: Manually rotating an object
4. Manipulatetheobjectwiththearrowkeysorwiththemouse.
Using the Transform
Dialog Box
Youcanmakeprecisechangestoanobjectbychangingthepropertiesinthe
Transformdialogbox.
To access the Transform dialog box (when an object is selected):
• ClickontheModelToolbarorontheModelSettingsribbon.
• Fromtheright‐clickcontextmenu,selectTransform.
• FromtheObjectmenu,selectTransform.
Figure 5-28: Transform dialog box
To change an object with the Transform dialog box:
¾
Changeanyofthevalues,thenclickApplytoseehowtheobject
changesonthebuildtray.
Note: The changed values remain in the dialog box after clicking Apply.
Therefore, you can make small changes to values in the dialog box to see
how the object changes on screen each time you click Apply.
To reset all of the values in the dialog box:
¾
ClickReset.
Note: The objet does not change. Any changes previously applied remain.
To undo all changes made with the Transform dialog box:
¾
ClickCancel Actions.
After closing the Transform dialog box, clicking Undo (on the Model Settings
ribbon or from the Edit menu) cancels all changes made with the dialog box.