User's Manual

Using Objet Studio
5–24 DOC-07000 Rev. A
Automatic
Placement
Afterplacingseveralobjectsonthebuildtray,youcanletObjetStudio
arrangethemonthetrayforprinting.Thisensuresthattheobjectsare
positionedproperly,andthattheywillbeprintedintheshortesttimeand
withaminimumofmaterial.
To automatically arrange objects on the build tray:
¾
OntheTraySettingsribbon,click.
or—
FromtheToolsmenu,select
Automatic Placement.
Theeffectsofautomaticpositioningareshowninthefiguresbelow.
Figure 5-20: Tray before
objects are properly arranged
Figure 5-21: Tray
arrangement when applying automatic placement
• For best results arrange the tray with Automatic Placement, on the Tray
Settings ribbon, even if you inserted the objects with the Orient
Automatically option.
• The physical characteristics of each type of model material you use can
affect the positioning of objects on the build tray. Therefore, select the
material before running Automatic Placement.