User's Manual

DOC-07000 Rev. A 5–13
Objet500 - Connex 3 User Guide
Stl file loading
preference
Ifthereareidenticallynamedstlfilesinmorethanonelocation,youneed
toensurethatthecorrectcomponentstlfilesarelinkedtotheobjtffile.For
example,ifthereareidenticallynamedstlfilesononedriveandonaflash
drive(thiscanoccurif
youcopytheoriginalfilestoaworkingfolder),you
cansetthedefaultlocationfromwhichfilesareloaded.
To set the Load Order:
1. FromtheToolsmenu,selectOptions.
or—
IntheObjetStudioCommandsMenu,click
Options.
2. IntheOptionsdialogbox,displaytheSettingstab.
Figure 5-10: Options dialog box, Settings tab
3. UnderLoadSearchOrder,selectanoption:
• Local—toloadfilesfromthelocationwheretheywerelastsaved.
• Original—toloadfilesintheiroriginallocation.
4. Click
OK.